Metal roofing for homes around Colorado Springs
- Hail keeps cracking or bruising your shingles, and you are tired of filing a claim after every summer storm.
- Wind has lifted or torn off shingles, tabs or ridge caps.
- You have a wood shake roof and live close to open grass, brush or forest.
- Your home sits high in the hills, where snow piles deep and stays for weeks.
- An older metal roof shows rust, loose screws or leaks along its seams.
- You plan to stay in the house a long time and want a roof that needs less patching.
Why metal fits this climate
Hail is the main reason people here ask about metal. FEMA's National Risk Index puts El Paso County in its Relatively High band for hail, and Teller County in its Relatively Moderate band. In the early hours of June 13, 2018, a rare night storm threw 3.0-inch hail across southern Colorado Springs and Fountain, and the damage bill was put at $169 million. That same month, stones 3.00 inches across fell north of Black Forest on June 19, 2018.
Metal does not crack or shed granules the way asphalt does, but big hail can dent it. Thicker panels dent less. Thickness is sold by "gauge," and a lower gauge means thicker metal. Before you choose, ask your insurer how it treats dents that are only cosmetic.
Colorado's Insurance Division suggests homeowners replacing a hail-wrecked roof ask their insurer what they could save on premiums or deductibles with a roof built to resist hail. The type of roof is also on the state's list of things that can push a premium up or down. SB26-155 sends at least 85% of the Strengthen Colorado Homes Enterprise's fee revenue to grants for homeowners who retrofit against hail and windstorms.
Wind is the next test. On December 15, 2021, a gust of 100 mph was measured at the US Air Force Academy. On June 17, 2025, an EF-1 tornado with peak winds estimated at 106 mph touched down north-northeast of Divide. Wind gets under loose edges, so tight fastening and stiff edge trim matter more than the panel itself.
Fire is a real worry too. FEMA rates El Paso County's wildfire risk as Relatively High, and the 2013 Black Forest Fire destroyed 486 houses. Metal panels do not burn, which is why many owners of wood roofs switch.
Snow is the last piece. Under the Pikes Peak Regional Building Code, a house whose grade plane (the ground level around it) sits under 7,000 feet is built to hold 30 pounds per square foot of snow on a flat roof, and one at 7,000 feet or higher is built to hold 40. Metal sheds snow in sudden slides, so plan where it will land.
What a metal roof job includes
| Part of the job | What happens |
|---|---|
| Inspection and measuring | The installer checks the decking (the wood boards under the roof), the framing and the pitch, and measures every slope and valley. |
| The old roof | Old shingles usually come off, though the Pikes Peak Regional Building Code lets a self-supporting standing-seam system that bears directly on the house's structure be laid on top of the existing coverings. |
| Underlayment | A sheet goes over the decking as a backup against water that gets past the panels. |
| Panels | Standing-seam panels lock together at raised seams with hidden clips; exposed-fastener panels are screwed through the face. |
| Flashing and trim | Bent metal pieces seal valleys, walls, chimneys, vents and the ridge. |
| Edges and gutters | Colorado Springs' wildfire rules want the lowest edge of the roof finished with a metal drip edge (a bent strip that guides water off) lapping into gutters and downspouts that will not burn, so no wood sheathing shows. See gutter installation. |
| Eaves and soffits | Colorado Springs' wildfire code asks for the exposed side of eaves, soffits and fascia to be covered in material that resists catching fire. |
| Snow guards | Small clips or bars go above doors, decks and walkways so snow lets go gradually. |
| Cleanup and walk-through | Screws and metal shavings are picked up with a magnet, since shavings leave rust stains, and you walk the job with the installer before the final payment. |
Local rules for metal roofs
- Colorado Springs: Since a January 1, 2003 ordinance, every home needs a Class A roof covering, the highest fire rating, whether it is new construction, a full re-roof or a repair covering over 25% of the roof area, and solid wood roofing is out. The wildfire code there calls for a Class A covering or an assembly tested to ASTM E108 or UL 790, so ask for paperwork showing your panel and underlayment combination passed.
- Permits: After hail or wind, PPRBD tells homeowners to confirm the contractor holds a PPRBD licence and that a permit is in place before the roof is replaced. The permit desk answers at 719-327-2883 from 7:30am to 4:15pm, and the website is www.pprbd.org.
- Unincorporated El Paso County: Appendix E wildfire rules cover the edge zone where neighborhoods back onto grass, brush and trees, outside any fire district. Replace 25 percent or more of the roof covering there and the whole covering has to meet those rules.
- Teller County: The county does not allow snow load reductions for homes. Inspectors in Woodland Park answer code questions by phone at 719-687-3048 on weekday mornings between 7:30 am and 8:30 am.
- Cripple Creek: In the Wildfire Protection Overlay, replacing or repairing 25% or more of the covering means redoing the whole roof to the wildfire code, and each building needs its own permit. In the Historic Overlay District, outside changes need a Certificate of Appropriateness, and staff decide on a roof replacement within ten business days once the application is complete. The guidelines favor muted shingle colors such as grey, dark green or dark red on historic homes, so ask staff early whether metal in a similar shade will pass.
- HOAs: Colorado law stops an HOA from demanding cedar shakes or other easy-burning roofing, and it voids any HOA rule against fire-hardened materials.
Getting help with a metal roof
Ask these questions before you hire:
- Who holds the PPRBD licence, and whose name goes on the permit?
- Which panel type, gauge and finish are in the written quote?
- Which test shows the full assembly is Class A?
- Will the old roof come off, and if not, why not?
- Where will snow guards go?
- How are dents, scratched finish or loose fasteners handled after the job?
If hail or wind already hit your roof, start with a roof inspection or storm damage repair. If you are weighing metal against shingles, compare it with asphalt shingle roofing and read about roof replacement. Send a request, and someone who installs metal roofs in the area will call you back to talk through your home.
More services
- Roof replacementWhen a roof needs replacing near Colorado Springs, what the job includes, local permit and code rules, contract…
- Gutter cleaningLearn the signs your gutters need cleaning near Colorado Springs, what a proper job includes, and the local wildfire…
- Roof repairRoof repair around Colorado Springs: when a patch needs a permit, how hail, wind and ice dams shape the fix, and what…
- Gutter installationNew gutters and downspouts for Colorado Springs homes: signs you need them, what the job involves, local snow and ice…
- Roof leak repairHow roof leaks are traced and fixed around Colorado Springs, why hail and ice dams cause them, and what a written…
- Roof inspectionWhat a roof inspection in Colorado Springs should cover after hail, wind and snow, what the report should say, and…
- Storm damage repairHail and wind damage roof repair around Colorado Springs: signs to look for, what the work involves, Colorado contract…
- Asphalt shingle roofingAsphalt shingle roofing around Colorado Springs: when to replace, local tear-off and ice barrier rules, hail-resistant…
- Tile roofingSigns a clay or concrete tile roof needs work, how snow and wildfire rules around Colorado Springs shape the job, and…
- Emergency roof repairWhat to do when hail, wind or ice opens your roof near Colorado Springs: stopping the water, permits, your contract…